SYNC 4000 – Control Center Concentrator

SYNC 4000 – Control Center Concentrator

SYNC 4000 series of products are Control Center level Data Concentrators that can be used for a variety of high performance  and heavy data applciations including Wide Area Monitoring, SCADA Data Aggregation, M2M Data Concentration, etc. SYNC 4000 PDC variant used as Synchrophasor data concentrator (PDC) can stream data from any IEEE C37.118 compliant phasor measurement unit.  SYNC 4000 CC variant are high end Control Center Gateways having M2M Server, Protocol conversion, PLC, and FEP functionalities built into one device. This product can be used to interconnect automation system (SCADA, EMS/DMS) LAN to WAN networks like MPLS/GPRS/CDMA/UMTS without compromising on the security of the network.

Specifications

General
  • Vast protocol conversion capability
  • Multi master/SCADA communication capability
  • Automatic startup and initialization following power restoration
  • Disturbance and fault record collection and management
  • IEC61131 based programing logic
  • Time synchronization using IEC60870/DNP3/SNTP/IEEE1588
  • Device management using SNMP/webserver
Reliability
  • KEMA Certified IEC 61850 Server
  • Supports Device redundancy
  • Server grade hardware
Security
  • Supports communication security on both upstream and downstream
  • Built in firewall to protect the system against possible intrusions
  • NERC-CIP security Compliant
  • IEC62351 based transport layer security
  • SSL VPN with AES, DES or 3DES encryption
Scalability & Upgradability
  • Serial Port Expandability using terminal server option available
  • Adaptable for customization and additional protocols
  • Control Center Gateway
  • ICCP Bridge
  • M2M Gateway with protocol conversion
  • Front End Processor

SYNC_4000

SPECIFICATION SHEET SYNC 4011
General Management Kalkitech EasyConnect Configuration utility / Web Server/ SNMP & SSH Interface over Secure Network.
System Protocols TCP/IP, UDP/IP, SMTP, POP, HTTP, FTP, SNMP, ICMP, DHCP, BOOTP, Telnet, DNS,ARP, PPPoE, DDNS
Device Security NERC/CIP Compliant, SSHv2
Communication Security SSL based VPN tunnel using Blowfish / AES/ 3DES
Logic Programming AND/OR/NOT/Bit SHIFT/Split/Index support for digital and analog data, Delay operations IEC61131-3
Redundancy Communication Redundancy
Device Redundancy
SMS based Alarm Available on request **
Certifications & Approvals Green Product RoHS, REACH
Others Provided as on request
Communication Capability Standard Protocols IEC 61850, ICCP TASE.2 (IEC 60870-6) DNP3.0, Modbus RTU/ASCII/TCP  IEC 60870-5-101/103/104IEC 62056 DLMS/COSEM IEC 61400, ODBC, IEEEC37.118
Proprietary Protocols ABB RP570, 571, SPA bus SEL SEL451, 421, 311, 300G  Schneider SEPAM Modbus  Areva Courier  RTK, EXCOM, CMC Master, SPORT, Triguard Peer to Peer
Additional Protocol Refer the full list of protocols at http://www.kalkitech.com/protocolsupport.htm
Device and data point support Server can be sized as per the requirement
Communication Interfaces Serial
Connector 2 RS232 DB9
Data Rate 110bps- 115.2kbps
Expansion Port expansion is possible using PCI card or using terminal server
Ethernet
Connector 2 RJ45
Physical layer Auto-sensing 10/100/1000 Mbps
Power Requirements Power Supply Two hot plug high efficient 570w PSU OR high output two hot-plug 870W PSUs
Physical Dimensions (H x W x D) 2U/ 3.4 x 17.44 x 26.8 inch
Weight (in kg) 25 kg * (approx.)
LED indications Power, LAN Link/Status
Mounting Rack