SYNC 2000 – Protocol Gateway / Converter

SYNC 2000 – Protocol Gateway / Converter

SYNC 2000 protocol gateway is one of the most widely used converters supporting a wide range of protocols (including IEC 61850, DNP3.0, IEC 101/103/104 and DLMS/ COSEM). It offers superior substation-grade ruggedness based on the IEC 61850-3 specifications yet versatile to be used in numerous Transmission and Distribution applications. The KEMA certified (for IEC 61850 server) and NERC-CIP compliant DIN rail mountable product has been sold to more than 500 customers worldwide for various substation and automation requirements.

Specifications

SPECIFICATION SHEET SYNC 2000 S2R1 SYNC 2000 S6R1 SYNC 2000 S4R2
General Management Kalkitech EasyConnect configuration utility/web server/SNMP & SSH Interface over secure network
Maintenance Direct over debug port or console port
System Protocols TCP/IP, UDP/IP, SMTP, POP, HTTP, FTP, SNMP, ICMP, DHCP, BOOTP, Telnet, DNS,ARP, PPPoE, DDNS
Device Security NERC/CIP compliant, SSHv2
Communication Security IEC62351-3 and -5 (DNP3 secure authentication), SSL based VPN tunnel using Blowfish/AES/3DES
Logic Programming AND/OR/NOT/Bit SHIFT/Split/Index support for digital and analog data delay operations
Redundancy Downstream/upstream communication
SMS Based Alarm Available* Available* Available*
Certifications IEC61850-10 KEMA, IEC61850-3, CE
Communication Capability Standard Protocols IEC 60870-5-101/103/104, DNP3 serial/TCP, Modbus RTU/ASCII/TCP, IEC62056-DLMS, IEC61850, IEC61400, ODBC, IEEE37.118
Protocolos Propietarios ABB - RP570, 571, SPA bus, SEL - SEL451, 421, 311, 300G, Schneider - SEPAM Modbus Areva - CourierRTK, EXCOM, CMC Master, SPORT,Triguard peer to peer
Additional Protocol Refer the full list of protocols at http://www.kalkitech.com/protocolsupport.htm
Multi-master Protocol No, one-to-one conversion Yes, many-to-many conversion
Device Supported SPA 20 20 25
DNP3, IEC60870, Modbus and other Proprietary Protocols 50 50 64
Datapoints Supported SPA 800 800 1600
DNP3, IEC60870, Modbus and other Proprietary Protocols 3000 3000 6000
Communication Interfaces Serie
Connector 2 RS232/485-RJ45 4 RS232/485 - RJ452 RS232 - RJ45 4 RS232/485/422 - RJ45
Data Rate 110bps-115.2bps
Ethernet
Connector 1 RJ45 1RJ45/ST FO** 2 RJ45
Physical Layer 10/100 Mbps
Isolation 1500VAC min per IEEE802.3/ANSI X3.263
Fiber Optic Option NA 1 multi mode fiber with ST connector NA
FO Range NA 1200 meter NA
 IO Interfaces Analog Via expansion modules
Digital Via expansion modules
Power Requirements Power Supply 19-58 VDC, 85-264 VAC 50-60Hz, 170-370 VDC 12 to 48 VDC
Consumption
Main Card 5W
Módem interno complementario 8W máximo NA
Plug-in Modem Options Internal NA GPRS/EDGE/ CDMA upgradeable to 3G NA
External NA RF modem, PSTN modem NA
Physical Dimensions (H x W x D) 165mm X 70mm X 135mm 165mm X 70mm X 135mm 60mm x 137mm x 100mm
Weight (In grams) 600 600 530
LED indications Power, LAN Link/Status, Serial Port RX/TX
Mounting DIN Rail
Environmental Operating Temperature -20 to 70 °C
Storage Temperature -40 to 80 °C
Relative Humidity 5% - 95% RH non-condensing
Emission Conducted Emission EN 55022:2006+A 1:2007 Class A
Radiated Emission EN 55022:2006+A 1:2007 Class A
Immunity Electrostatic Discharge IEC 61000-4-2:2001 -+/-8kV Descarga de Contacto, +/-15kV Descarga en aire NA
Radiated Susceptibility IEC 61000-4-3:2006 – 20V/m NA
Electrical Fast Transient/Burst IEC 61000-4-4:2004 -+/-4 kV Signal Ports @ 2.5 kHz, +/-4kV DC Power Ports, +/- 4kV Earth ground ports 3 NA
Surge Protection IEC 61000-4-5:2005 -+/-2 kV línea a tierra, +/-1kV línea a línea NA
Induced (Conducted) RFI IEC 61000-4-6:2004 -10V Signal Ports, 10V DC Power Ports, 10 V Earth Ground Ports 3 NA
Magnetic Field IEC 61000-4-8: 2001 -40A/m Continuous, 1000 A/m for 1s Enclosure Ports NA
Voltage Dips & Interrupts IEC 61000-4-29: 2000 – 30% por 0.1s, 60% for 0.1s, 100% por 0.05s NA
Damped Oscillatory IEC 61000-4-12:2001 – 2.5 kV common, 1kV diff.Mode @ 1MHz Signal Ports and DC Power Ports NA
General
  •  Supports more than 40 protocols including IEC 60870-5-101/103/104, IEC 61850, DNP3.0, Modbus RTU/ TCP, and DLMS COSEM
  • Automatic startup and initialization following power restoration
  • Multi master communication capability (many-to-many protocol conversion)
  • Support for up to 3000 data points
  • Storage for up to 50000 events
  • File upload/ download support
  • Remote configuration
  • Time synchronization using IEC60870/DNP3/SNTP
  • Transparent/tunneling support for remote configuration and disturbance data collection
  • Device management using SNMP/ webserver
  • Network tunneling support
Reliability
  • IEC 61850-3 compliant hardware
  • KEMA certified IEC 61850 server
  • High MTBF suitable for utility requirements
Security
  •  NERC-CIP compliant security
  • IEC62351 support
  • SSL VPN with AES, DES or 3DES encryption
Scalability
  • Variants with up to 12 serial ports and 2 Ethernet ports available
  • Internal and external pluggable cellular modem (GPRS/EDGE/CDMA/UMTS)
  •  External pluggable RF/PSTN modem
  • Fiber optic Ethernet option
  • In-built and plug-in I/O support
  • Option for expanding communication port
  • Wide range of AC and DC power supply
  • Adaptable for customization of existing protocols as well as adding new protocols

SYNC_2100_Diagram